Ultrasonic flowmeter is based on the principle of velocity difference method to measure liquid flow in a circular tube. This series of instruments adopts digital transmission, digital reception, digital analysis, digital output and other advanced micro power digital design technology, the instrument measurement is accurate, reliable operation, more suitable for the needs of industrial field. Converter forms are: wall mounted, disc mounted, integrated; Sensor forms are: insert type, tube section type, external clip type.

Ultrasonic flowmeter characteristics

1. The measurement linearity is better than 0.5%, the repeatability accuracy is better than 0.2%, and the measurement resolution is as high as 40 picoseconds, making the measurement accuracy reach ±1%.

2. 128 times of data acquisition in each measurement cycle is assisted by the newly developed flowmeter time difference analysis software, which has excellent performance and makes the display data more stable, accurate and linear.

3. Isolated RS485 interface, flow meter and secondary table can communicate through RS485 bus, transmission distance of more than kilometers.

4. With three analog input interfaces with precision of 0.1%, can be connected to temperature, pressure, liquid level and other signals.

A 5.1 channel 4-20 mah analog output can be used as a flow/heat transmitter.

6.2 3-channel PT100 resistance signal input can be used as a heat meter.

7.3 Channel 4-20 mah analog input, which can be used as data collector, analog input interface can be used as digital input interface.

8. With dual-channel isolation type programmable OCT output, used to output cumulative pulse, working status, etc.

9. Sewage pipe measurement effect is good, can be stable and reliable measurement of the vast majority of sewage pipes.

10. Ultrasonic sensor can choose the external clip type, insert type, tube segment type, also can support any Angle installation of water meter sensor, including parallel insert sensor.

11. With a bidirectional serial peripheral universal interface, can directly connect a number of such as 4-20 ma analog output board, frequency signal output board, thermal printer, data recorder and other external equipment through the series form.

12 flowmeter working parameters can be solidified into the machine FLASH memory, will not occur the problem of parameter loss. The working parameters of curing can be selected automatically when powering on.

13. Hardware modular design. It is composed of motherboard module, 4-20 MA output module, pulse output module, printer module, parallel keyboard display module, serial keyboard display module, etc. Users can choose according to their needs.

14. Different software communication protocols such as MODBUS protocol, MBUS protocol, FUJI extension protocol and simple water meter protocol are available for users to choose from. The recommended protocol is MODBUS-RTU or MODBUS-ASCII.

15. The daily accumulation can be recorded in the first 64 days, the month accumulation in the first 32 months (2 years), and add the year, month and day record content. The accumulated data can be read by MODBUS protocol.

16.16 Time of up - off flow meter record. The data can be read over MODBUS.

17. Timing printing, data output function, automatic display of the next print output time, 22 programmable timing printing content. Timing printing function can realize automatic timing output or automatic recording of data.

18. The pulse width of the OCT1 cumulative pulse output can be set between 6 milliseconds and 1 second. The factory default is 200 milliseconds.

19. With keyboard display parallel interface, connected display components can form a simple flowmeter.

20. The serial keyboard display component can be directly connected to the serial port. After the parameter setting is complete, it can be plugged in and out.

21. It has the function of judging the type of fluid by the sound velocity of fluid and can identify the type of fluid.

22. Has a programmable built-in quantitative controller. It can be started using an external input signal or MODBUS instruction.

23. Single 24V DC power supply, working current less than 50 ma. (when the display is not connected and the buzzer does not sound).